The MATRIX Digital Inductive Loop Detectors range is the ideal solution for parking barrier control, motorized gates and doors, vehicle access control and industrial control systems.
| Technology | Inductive loop |
|---|---|
| Tuning | Automatic |
| Detection mode | Presence |
| Presence time | 1 min to infinity (permanent presence) with 250 steps |
| Pulse time output | 100ms or 500ms |
| Inductance range | 20µH to 1000µH |
| Frequency range | 20kHz to 130kHz |
| Frequency steps | 4 for single loops 2 for dual loops (for each loop)z |
| Sensitivity (Δ L / L) | 0.005% to 9.5% with 250 steps |
| Reaction time | 25ms for single loop 50ms for dual loop (each channel) |
| Setup time at power on | 8s max by channel |
| Power supply (depending onmodel) | 12-24 AC/DC ± 10% 230V AC ± 10% 90 –> 125 V AC ± 0% |
| Mains frequency | 48 to 62 Hz |
| Power Consumption | <2.5 W |
| Storage temperature range | -30°C to 70°C |
| Operating temperature range | -30°C to +40°C |
| Degree of protection | IP40 |
| 2 Outputs relays (free potential change-over contact) | max contact voltage : 230 VAC max contact current : 5A (resistive) |
| LED indicators | 1 green LED : power 1 red LED : Loop status 1 1 red LED : Loop status 2 |
| Protections | Loop insulation transformer zener diodes gas discharge clamping |
| Connection | standard 11-pin round connector 86CP11 |
| Dimensions | 77mm (H) x 40mm (W) x 75mm (D) |
| Weight | <200gr |
| Product compliance | R&TTE 1999 / 5 / EC EMC 89 / 336 / EEC UL listed equipment for UL 508 |